澳门·沙金1991cc(官方)-登录入口

当前位置: 首页 > 科学研究 > 科研成果 > 正文

2020年发表高水平论文

时间:2021-03-14 浏览量:

论文题目

第一作者

期刊名称

Effect of alkali poisoning on simultaneous removal NO and dioxins over SCR catalysts for the sintering flue gas

钱立新

钢铁研究学报

Classified utilization of sintering EAF dust

秦立浩

钢铁研究学报

Low concentration quenched electroluminescent devices based on bipolar rhenium complexes

陈熳

无机化学学报

Influence of spirofluorene on photoelectric properties of iridium complexes containing tridentate phosphite ligands

陈熳

无机化学学报

Effect mechanism of Ca2+ and Mg2+ in water on the floatability of specularite and chlorite

李明阳

过程工程学报

Evolution process of FeSi5Cr5.5/SiO2 core-shell structure during fluidized bed chemical vapor deposition

吴朝阳

过程工程学报

Influence of the dilution gas flow rate on SiO2 deposition on the powder surface during the fluidized vapor deposition

吴朝阳

过程工程学报

Experimental study on use of viscous Gushan concentrate in pelletizing of Masteel

余正伟

钢铁研究学报

Reduction characteristics of iron oxide by different biomass

魏汝飞

钢铁研究学报

Effect of P2O5 on lime dissolution process in steelmaking slag

曹彦博

过程工程学报

Effect of soaking temperature on microstructure evolution and hardness of Ti-V complex microalloyed steel

倪玲玲

金属热处理

Ni-W Co-deposition and Property of Closed Cell Aluminum Foam

杜中德

表面技术

Increase of magnesium during electroslag remelting process and its
effect on inclusions

高岗

过程工程学报

Inhibition behavior of PCDD/Fs congeners by addition of N-containing compound in the iron ore sintering

王毅璠

Aerosol Air Quality Research

Study of Catalytic Combustion of Dioxins on Ce-V-Ti Catalysts Modified by Graphene Oxide in Simulating Iron Ore Sintering Flue Gas

施琦

Materials

High-yield synthesis of Ce modified Fe-Mn composite oxides benefitting from catalytic destruction of chlorobenzene

李安琪

RSC Advances

Mechanistic study of selective adsorption and reduction of Au (III) to gold nanoparticles by ion-imprinted porous alginate microspheres

高翔鹏

Chemical Engineering Journal

Adsorption of heavy metal ions by sodium alginate based adsorbent-a review and new perspectives

高翔鹏

International Journal of Biological Macromolecules

Selective adsorption of Pd (II) by ion-imprinted porous alginate beads: Experimental and density functional theory study

高翔鹏

International Journal of Biological Macromolecules

Flotation separation of specularite from chlorite using propyl gallate as a collector

高翔鹏

RSC advances

Influence of NbC-doping on the microstructure and thermo-mechanical properties of tungsten coating fabricated by supersonic atmospheric plasma spraying

侯清宇

Surface and Coatings Technology

Study on preparation of the pellets for blast furnace lining protection made from cold  bonded titanium concentrate

代梦博

烧结球团

Effect on corrosion resistance of microstructure of 316L austenitic stainless steel subjected to combined torsion-tension deformation

张纪东

 INTERNATIONAL JOURNAL OF MATERIALS RESEARCH

Deformation Mechanisms of 316L Austenitic Stainless Steel Tubes under Equal Channel Angular Pressing

张纪东

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

High stability and luminance efficiency thieno[2,3-d] pyridazine-based iridium complexes and their applications in high-performance yellow OLEDs

梅群英

Dalton Transactions

Blue iridium(III) complexes with high internal quantum efficiency based on 4-(pyridin-3-yl)pyrimidine derivative and their electroluminescent properties

程伟

Dyes and Pigments

Effect of the triptycene scaffold on the photophysical, electrochemical and electroluminescence properties of the iridium(III) complex

周跃跃

New Journal of Chemistry

Preparation and electroluminescent application of iridium(III) complexes containing sulfur-containing phenylpyridazine ligands

程伟

Transition Metal Chemistry

The one-pot synthesis of homoleptic phenylphthalazine iridium(III) complexes and their application in high efficiency OLEDs

胡媛媛

Journal of Luminescence

Online prediction of mechanical properties of hot rolled steel plate using machine learning

谢谦

Materials & Design

Understanding and optimization of thin film nanocomposite membranes for reverse osmosis with machine learning

Yeo and Xie Qian

Journal of Membrane Science

Multigenerational Crumpling of 2D Materials
for Anticounterfeiting Patterns with Deep
Learning Authentication

Jinglin and Xie Qian

Matter

Experimental Investigation of the Fluidization Reduction Characteristics of Iron Particles Coated with Carbon Powder Under Pressurized Conditions

徐其言

MOLECULES


Effects of pressure and plastic addition on sticking of fine iron ore particles in fluidized bed reduction

徐其言

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

Effective Mechanism of B2O3 on the Structure and Viscosity of CaO-SiO2-B2O3-based Melts

Shama Sadaf

steel research international

Effect of Basicity on the Structure, Viscosity and Crystallization of CaO-SiO2-B2O3 Based Mold Fluxes

Shama Sadaf

metals

A New Method for Plasticization of Inclusions in Saw-Wire Steel by NaF Addition

陈良军

Metals

Effect of 2CaO·SiO2 particles addition on
dephosphorization behavior

邓爱军

High Temperature Materials and Processes

Simulation Research on Oxygen Mass Transfer between the Steel and Slag in IF Steel Refining Process

邓爱军

Journal of Iron and Steel Research
International

Developing Computational Model to Predict Protein-Protein Interaction Sites Based on the XGBoost Algorithm

邓爱军

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Prediction of re-oxidation behaviour of ultra-low carbon steel by different slag series

邓爱军

Scientific Reports

Cu(II)/Ni(II)离子对镜铁矿和绿泥石浮选的活化作用及机理

陈泽

硅酸盐通报

Understanding the differential depression of tetrasodium glutamate diacetate on the separation of specularite and chlorite: Experimental and DFT study

李明阳

Minerals Engineering

The effect of selective adsorption of dissolved aegirite species on the separation of specularite and aegirite

李明阳

Advanced Powder Technology

Investigation of the specularite/chlorite separation using chitosan as a novel depressant by direct flotation

李明阳

Carbohydrate Polymers

Effect of iron-bearing by-products on the emission of SO2 and NOx in the iron ore sintering process

郄俊懋

Transactions of the indian institute of metals

The investigation on the middle period dephosphorization in 70t converter

邓南阳/王海军

High Temperature Materials and Processes

Experimental study on impact of iron coke hot briquette as an alternative fuel on isothermal reduction of pellets under simulated blast furnace conditions

王宏涛

Fuel

Temperature-controlled conversion from Fe-Si particles to integrated Fe-Si/SiO2 core-shell structure particles during fluidised bed chemical vapor deposition

刘莉

Ceramics International

Silica coating of Fe-6.5wt%Si particles using fluidized bed CVD: Effect of precursor concentration on coreshell structure

吴朝阳

Journal of Physics and Chemistry of Solids

Formation Process of the Integrated Core(Fe-6.5wt.%Si)@Shell(SiO2) Structure Obtained via Fluidized Bed Chemical Vapor Deposition

吴朝阳

Metals

An environmental-friendly process for recovery of tellurium andcopper from copper telluride

徐亮

Journal of Cleaner Production

Recycling of copper telluride from copper anode slime processing: Towardefficient recovery of tellurium and copper

徐亮

Hydrometallurgy

Adsorptive removal of trace thallium(I) from wastewater: A review and newperspectives

赵卓

Journal of Hazardous Materials

Determination of bismuth in complex copper anode slime by EDTA titration

张福元

冶金分析

Complex isothermal precipitation behavior of V(C, N) in V-, N-added low carbon steel

杨永

Journal of Materials Science

Isothermal precipitation behavior of vanadium carbonitride in V, N-added low carbon steel

杨永

Steel Research International

Investigation of the effect of electrolytic hydrogen charging on tensile-ductility loss in different Al-added low density steels

章小峰

Materials Science and Engineering: A

Research progress toward hydrogen embrittlement microstructure mechanism in FeMn(Al)C high-streng-and-toughness steelFe-Mn-Al-C高强韧性钢氢脆微观机制的研究进展 )

章小峰

工程科学学报

Cause analysis and control of edge crack of low density steel plate with high aluminum content(高铝低密度钢板带边裂成因分析及控制 )

章小峰

兵器材料科学与工程

Study on Phase Diagram Calculation and Microstructure and Properties of Hot Rolling Fe-8.3Mn-xAl-C Low Density SteelFe-8.3Mn-x Al-C低密度钢相图计算及热轧组织性能研究 )

章小峰

热加工工艺

Research progress on welding technology of Fe-Mn-Al-C low density and high strength automobile steelFe-Mn-Al-C低密度高强钢焊接技术的研究与进展)

一作:万亚雄(研究生);通讯作者:章小峰

焊接

Electrochemical behavior and electrolytic preparation of lead in eutectic NaClKCl melts

朱曾丽

Transactions of Nonferrous Metals Society of China

Electrochemical behavior of Dy(III) and formation of Dy-Zn alloy by co-reduction with Zn(II) in eutectic NaCl-KCl melts

朱曾丽

Journal of The Electrochemical
Society

NaCl-KCl-NdCl3-AlCl3熔盐体系电解制备Nd-Al合金及机理

耿傲

稀有金属材料与工程

Effects of direct reduction process on the microstructure and reduction characteristics of carbon-bearing nickel laterite ore pellets

张颖异

Powder Technology

Synthesis WSi2 coating on W substrate by HDS method with various deposition times

张颖异

Applied Surface Science

Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD

张颖异

Surface and Coatings Technology

Effect of hot dip silicon-plating temperature on microstructure characteristics of silicide coating on tungsten substrate

张颖异

Ceramics International

Toughening Mechanism of Mullite Matrix Composites: A Review

张颖异

Coatings

Investigation on the control of multiphase flow behavior in a continuous casting tundish during ladle change

徐蕊

Metallurgical Research & Technology

Effect of electropulsing on the precipitation of NbCN from austenite phase

朱正海

Materials Science and Technology

Microstructural evaluation of WC and steel dissimilar bilayered composite obtained by Spark Plasma Sintering

Mahadi Hasan

The International Journal of Advanced Manufacturing

Optimisation of sintering parameters for bonding nanocrystalline cemented tungsten carbide powder and solid high strength steel

Mahadi Hasan

Composite Interfaces

Effect of 2CaO·SiO 2 particles addition on dephosphorization behavior

邓爱军

High Temperature Materials and Processes

Morphological changes of elongated MnS inclusions during heat treatment
process

夏云进

IRONMAKING & STEELMAKING

Hierarchically porous carbon sheets/Co nanofibers derived from corncobs for enhanced microwave absorbing properties

姚永林

Applied Surface Science

A novel approach for the selective extraction of Li+ from the leaching solution of spent lithium-ion batteries using benzo-15-crown-5 ether as extractant

姚永林

Separation and Purification Technology

Effect of Ti/V ratio on thermodynamics and kinetics of MC in γ/α matrices of Ti-V microalloyed steels

张可

Journal of Iron and Steel Research International

Numerical Simulation of the Melting Behavior of Steel Scrap in Hot Metal

周小宾

Metals

Toward the Bath Flow Interaction of a 250t Combined Top and Bottom Blowing Converter Based on a Mathematical Modeling

周小宾

Steel Research int.

Reduction of Iron Oxide by Lignin: Characteristics, Kinetics and Superiority

魏汝飞

Energy

Combustion Characteristics and Kinetics of Different Food Solid Wastes Treatment by Blast Furnace

周笛(学生第一作者)

Renewable Energy

Reduction characteristics of iron oxide by the hemicellulose, cellulose, and lignin components of biomass

魏汝飞

Energy & Fuels

 

下一篇:2020年授权专利

电话:0555-2311571 E-mail:yjxy@ahut.edu.cn

地址:安徽省马鞍山市马向路1530号秀山校区冶金楼 邮编:243032

XML 地图