[1] Zhang, L., Xie, Q* et al. An improved defect recognition framework for casting based on DETR algorithm. J. Iron Steel Res. Int. 30, 949–959 (2023). [2] Yang, Z., Xie, Q* et al. Online Prediction of Mechanical Properties of the Hot Rolled Steel Plate Using Time-series Deep Neural Network. ISIJ Int. 63, 746–757 (2023). [3] Jing, L., Xie, Q* et al. Unclonable MXene Topographies as Robust Anti‐Counterfeiting Tags via Fast Laser Scanning and Siamese Neural Networks. Adv Materials Technologies 2300568 (2023). [4] Xie, Q et al. 2022. Two-dimensional transient heat transfer model of moving quenching jet based on machine learning. International Journal of Heat and Mass Transfer 191, 122765. [5] Cai, J., Xie, Q.*, Li, H., Li, S., 2022. Understanding the effect of interface on the charge separation in Bi2S3@Sn: α-Fe2O3 heterojunction for photoelectrochemical water oxidation. Renewable Energy 191, 195–203. [6] Jing, L*., Xie, Q*. et al. 2020. Multigenerational Crumpling of 2D Materials for Anticounterfeiting Patterns with Deep Learning Authentication. Matter 3, 2160–2180. [7] Xie, Q. et al., 2021. Online prediction of mechanical properties of hot rolled steel plate using machine learning. Materials & Design 197, 109201. [8] Chester Y. S. H.*, Xie, Q*, et al. (2020) Understanding and optimization of thin film nanocomposite membranes for reverse osmosis with machine learning. Journal of Membrane Science 606, 118135. [9] Xie, Q. et al. (2019). Heat Transfer from a Hot Steel Plate Impinged by Air-atomized Water Jet and Impinging Water Jet. ISIJ Int. 59, 113–121. [10] Cai, J., Xie, Q*. (2018). In situ electrodeposition of mesoporous aligned α-Fe2O3 nanoflakes for highly sensitive nonenzymatic H2O2 sensor. Applied Surface Science 456, 302–306. [11] Xie, Q. et al. (2016). Experimental Investigation of High-temperature Steel Plate Cooled by Multiple Nozzle Arrays. ISIJ Int. 56, 1210–1218. [12] Xie, Q. et al. (2016). Heat Transfer Coefficient and Flow Characteristics of Hot Steel Plate Cooling by Multiple Inclined Impinging Jets. ISIJ Int. 56, 2236–2242. [13] Xie, Q. et al. (2015). The Effect of Jet Angle and Initial Plate Temperature during Jet Impingement Heat Transfer Process in Ultra-Fast Cooling Technology. Steel Research International 86, 489–494.
|
[1] 国家自然科学基金委员会，青年基金，高速移动状态热轧板带钢多束射流复杂流场换热机理研究，2022-1至2024-12,主持。 [2] 国家自然科学基金委员会，钢铁联合研究基金重点项目，U1860201，热轧无缝钢管在线控制冷却机制及形变/相变一体化在线组织调控，2019-01至2022-12，参与 [3] 安徽省青年基金，中厚板移动条件下高强度均匀化换热基础研究，2019-01至2021-12，主持 [4] 国家重点实验室开放课题，高温钢板高效均匀化汽雾喷射换热机理研究，2016-12至2018-12，主持 [5] 产学研项目（宝钢股份），C008产线镀层闭环控制系统开发，主持 [6] 产学研项目（宝钢湛江），热轧中厚板层流冷却自动控制系统开发，主持 [7] 产学研项目（宝钢湛江），热轧中厚板层流冷却自动控制系统开发，主持 [8] 产学研项目（宝钢湛江），1550热镀锌气刀自动控制系统开发，主持 [9] 产学研项目（宝钢湛江），1550连退加热炉温度、速度耦合控制系统开发，主持 [10] 产学研项目（宝武钢铁集团），基于机器学习的热轧含Ti高强钢数字化研发系统开发，主持 [11] 产学研项目（宝钢湛江），2030酸洗拉矫机自动控制模型开发，主持 [12] 产学研项目（宝钢湛江），1550连退加热炉自动控制模型开发，主持 [13] 产学研项目（宝钢湛江），2030热镀锌平整机自动控制模型开发，主持 [14] 产学研项目（宝钢湛江），1550连退平整机自动控制模型开发，主持
|
